Primary materials for solenoid valve diaphragms

Aug 07, 2026

Leave a message

Solenoid valve diaphragms are primarily made of fabric-reinforced rubber or pure rubber, though materials such as stainless steel and aluminum alloy are also used. The diaphragm features resistance to oil, acids, alkalis, and high temperatures. It utilizes a double-sided pressure design, offering equal pressure-bearing surfaces on both sides, low hysteresis, and non-stick characteristics.

 

Under an ambient temperature of -20 to 80°C and an operating pressure differential of 0.8 MPa, the diaphragm has a service life of at least one million cycles. The specific operating temperature and pressure ranges depend on the rubber compound, fabric reinforcement, and structural design; diaphragms can operate within a temperature range of -50 to 100°C and a pressure range of 0.4 to 0.8 MPa, while fluororubber and silicone rubber diaphragms can operate between -80 and 232°C [1] [13]. Epichlorohydrin rubber diaphragms operate at pressures of 0.4 to 0.8 MPa, offering excellent airtightness and aging resistance.

 

The performance capabilities of electromagnetic pulse valve diaphragms have expanded significantly: nominal diameters can reach 300 mm, medium temperatures range from -200°C to 450°C, and operating pressures span from vacuum conditions up to 25 MPa.

Send Inquiry