-
Drum Gear CouplingThe Drum Gear Coupling is intended for the connection between a reducer and drum in lifting mechanisms, where the coupling must transmit torque and also carry radial load. Its structure combines a...
-
Flexible Grid CouplingSuitable for drives requiring torque transmission with impact cushioning and vibration reduction.
Available in DCY, DCF, T05, T10, T20, T31, T35, T61, and T63 series.
Structures... -
Universal Joint Shaft CouplingThe Universal Joint Shaft Coupling is used where two shaft centerlines operate at an angle.
Available structures include single-cross and double-cross configurations.
Telescopic and... -
Flexible Gear CouplingThe Flexible Gear Coupling connects two shaft systems through internal and external gear engagement.
The structure is used for transmitting relatively large torque.
CL and CLZ... -
Torque Limiting CouplingThe Torque Limiting Coupling uses a sprocket, friction plates, disc springs, and an adjustment structure.
The friction torque can be set within the applicable product range.
When... -
Flexible Star CouplingThe Flexible Star Coupling consists of two coupling halves and a star-shaped elastic element positioned between them.
The elastic element transfers torque while also providing cushioning... -
Flexible Jaw CouplingThe Flexible Jaw Coupling uses two coupling halves with an integral plum-shaped elastic element between the jaws.
The elastomer transfers torque through contact with the jaw structure.... -
Flexible Pin Gear CouplingThe Flexible Pin Gear Coupling transfers torque through elastic pins combined with a gear-type structure.
The pins act as the elastic transmission element.
The product range covers... -
Flexible Pin CouplingThe Flexible Pin Coupling uses pins to connect two coupling halves and transmit torque.
LX is the standard configuration.
LXZ adds a brake wheel for equipment requiring integration... -
Cross Slider CouplingThe Cross Slider Coupling uses an intermediate slider moving in radial grooves in the two coupling halves.
Its main compensation direction is radial displacement.
A certain amount of... -
Grid Coupling CoverThe Grid Coupling Cover is used to enclose the grid spring, tooth grooves, and lubrication area of T-series grid couplings.
It works together with seals and fasteners to provide external... -
Grid Coupling SpringThe Grid Coupling Spring is the main elastic transmission element used in a grid coupling.
It is installed between the tooth grooves of the two coupling halves.
Contact between the...
The drum-shaped gear coupling produced by our company is a rigid-flexible coupling. It has the ability to compensate for axis deviations in the radial, axial and angular directions. Compared...
Drum gear couplings are rigid-flexible couplings, with radial, axial and angular axis deviation compensation capabilities. Compared with CL type spur gear couplings, they have compact structure,...
The drum gear coupling is a specially designed advanced gear coupling. Its outer teeth are made into a sphere, with the center of the sphere on the axis of the gear....
Bearing capacity of drum gear coupling is strong. With the same outer diameter, the bearing capacity of drum teeth is 15 ~ 20% higher than that of direct coupling; Drum gear coupling...
In the coupling, under the condition of angular displacement, the edge of the straight tooth is squeezed, and the stress is concentrated. The drum-shaped tooth surface improves the contact conditions...
NGCL drum gear coupling is designed with a brake wheel, suitable for situations where braking is required. Technical parameters and dimension of NGCL drum gear coupling 135 0528 9959 QQ Chat WeChat...
